Can be mounted to standard available subplates and bar manifolds. Maximum flow of 31 gpm.Maximum working pressure = 4560psi (315 Bar). 3-position, 4-way, Spring centered, energize to shift. Valve can be mounted in any direction. Coil can be rotated to optimal connector position. Uses DIN 46350 Form A electrical connection type.
Includes lighted DIN connector for each coil. LED illuminates clear connector housing when power is supplied to the connector/coil. Use with mineral based hydraulic fluid. Four fastening screws included, M6x40mm long. White label with no logo for OEM manufacturers.Weight = 10.8 lbs (4.9 kg). Solenoid Voltage: 12VDC, 24VDC, 110VAC (50 or 60 hz), 220VAC (50 or 60 hz). M : Motor spool, A and B ports to tank and P port blocked when centered.
Actuators will move freely from external forces when the valve is in the center position. Motors and cylinders will coast to a stop when centering. Adding an A&B port P.Check valve under this valve will ensure a positive stop and hold the position of a motor and cylinder for longer durations. T : Tandem Spool, A and B ports closed and P to T in center position. Actuators will stop in center position and the supply pressure will be directed to tank. Commonly used with fixed displacement gear pumps so pressure can flow direct to tank and not build up heat by blowing across a relieve valve as would be needed with the M and C spool. Mounting Pattern of mating surface (mm). High volume OEM series production available per request. The item "Hydraulic Directional Control Valve D05 (NG10) 31 GPM 4560 psi AC or DC" is in sale since Thursday, January 7, 2021. This item is in the category "Business & Industrial\Industrial Automation & Motion Controls\Mechanical Power Transmission\Other Mechanical Power Transmission". The seller is "fluidhaus" and is located in Milwaukee, Wisconsin.
This item can be shipped worldwide.